Thermoplastic Welding Rods
The most important element to successful thermoplastic welding is the filler rod. To insure proper bonding, it is essential that filler rods be made with the same high grade resins used in the material being welded.
The Primeweld plastic welding rod is extruded using only the highest grade resins available.
- Available in a large variety of materials
- Dimensions from .090″ to .500″
- Variety of Shapes
- Metric sizes also available
Available Materials: ABS, PVC, LDPE, LLDPE, HDPE, HDPE 3407B, Polypro, Copoly, Styrene, PETG, CPVC, Corzan, Corzan White 4910, Urethane I &II, Polycarbonate, Kynar
Dimensions: .090″, .125″, .1563″, .1875″, .250″, .3125″, .375″, .500″
Shapes: MW, MWK, LEISTER, KST, OVALS
Metric sizes also available.
For more information, a quote, or to order Primeweld plastic welding rods, contact us today.
|Hardness, Shore A||62|
|Tensile Strength, psi||1980|
|Elongation at Break, %||730|
|Brittle Temperature, F||-20.2|
* Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
Get the Product Data Sheet
Primeweld is used in the welding of the following materials:
- HDPE 3407B
- Corzan White 4910
- Urethane I & II